تصفح محتويات المستودع باستخدام اسماء الناشرين

انت تشاهد مقالات الاستاذ  حيدر عبد الحسن حسين العذاري
عدد المقالات والبحوث 12 هذا الاستاذ ينشر تحت فئة كلية هندسة المواد

OPTIMIZATION of Al-BASE COMPOSITE USING GENETIC ALGORITHM  741 Views
This paper provides six tests were carried out for the base alloy (BA) (Al-2%Mg) and the three composite samples ((A1 (Al- 2%Mg-2%CKD), A2 (Al-2%Mg-8%CKD) & A3 (Al-2%Mg-16% CKD)))
EFFECT OF COMPACTING PRESSURE ON MICROSTRUCTURE,PHYSICAL AND MECHANICAL PROPERTIES OF NiTi SMA PREPARED BY POWDER METALLURGY  652 Views
This study investigates the effect of different compacting pressures on microstructure ,physical and mechanical properties of NiTi shape memory alloys.
TAGUCHI METHOD TO OPTIMIZE MACHINING CONDITIONS AFFECTING CEMENTED CARBIDE TOOL S WEAR LIFE IN TURNING AISI 1020 STEEL  699 Views
The present work studied the performance of a carbide tool
Preparation of Copper-Alumina Electrical Contact Materials  665 Views
In this paper copper with different weight percentage of ?-alumina composite are prepared by using powder metallurgy technique.
Variables Affecting the Chemical Machining of Stainless Steel 420  524 Views
The present work is aimed at studying the effect of machining temperature, machining time, and previous cold working on the metal removal rate and the surface finish of chemically machined samples of stainless steel 420
OPTIMIZATION OF CHEMICAL MACHINING CONDITIONS OF COLD WORKED STAINLESS STEEL 420 USING TAGUCHI METHOD  562 Views
The present work is aimed at utilizing of robust experimental design Taguchi method for optimization of chemical machining parameters.
EFFECT OF GRAPHITE ON MECHANICAL AND MACHINING PROPERTIES OF Al-BRONZE PREPARED BY P/M   634 Views
In the present study, a base aluminum bronze alloy with a chemical composition of (Cu – 11%Al) is prepared basing on powder metallurgy technique
EFFECT OF GRAPHITE ON MECHANICAL AND MACHINING PROPERTIES OF Al-BASE HYBRID COMPOSITE  650 Views
The present work is aimed at studying the preparing of hybrid AMMC reinforced with both SiC particles and particles of graphite
Investigation of Mechanical Properties of Recycled Aluminum-Fly Ash Composite  572 Views
aluminum used to produce Al-MMC in this study is recycled aluminum from used beverage cans (UBCs), while the reinforcement is fly ash as a powder residue generated at Al-Musayab power plant-Babylon/Iraq.
دراسة حول تطوير تحضير سبيكة الالمنيوم (8009) وتحسين كفاءة أدائها باضافة الزركونيوم والمعاملة السطحية.   4399 Views
تهدف الدراسة الى تقليل الكلفة التصنيعية وإطالة عمر الكلال والارتقاء بالاستقرارية الحرارية لسبيكة الالمنيوم (8009)
Stress Analysis of Fiber-reinforced Composite Built-up Beam  3201 Views
Macro- and microscopic levels of analyses are used to capture the behavior of a built-in beam made of a unidirectional fiber-reinforced polymeric material
Influence of Cu and B on the machineability of (Al-Fe) alloy  3430 Views
To study how the machineability of an (Al-Fe) alloy will be affected by adding together Boron and Copper

This Page was dynamically generated on 11/21/2024 2:42 PM

البحث في الموقع

Authors, Titles, Abstracts

Full Text




خيارات العرض والخدمات


ادارة المستودع الاكاديمي


مجلة المحقق الحلي
مجلة العلوم الانسانية
مجلة العلوم التطبيقية والصرفة
احصائيات وارقام في المستودع
الدخول لحساب في الشبكة


link in the repository ادارة مستودع بيانات الجامعة

     uobabylon@gmail.com
     uob.it.operations@gmail.com
     uob.it.operations@uobabylon.edu.iq

© University of Babylon 2012. All rights reserved.